This PC screen dump shows that I did receive PA0JMK in The Netherlands calling YU1RP in Yugoslavia. Unfortunately the vertical screen resolution of my mini-PC is not large enough to show the waterfall part of the ROS GUI. ROS home page from where you can download the software, instructions etc. is here and a video is here. The ROS mode has caused som stir as it occupies a large bandwidth of 2.2 kHz in the HF bands. The mode has become forbidden to use in the U.S. because of the spread spectrum part of it. Read more about it in G4ILO´s blog. In K3UK´s Sked Page (digital section) you can follow what is going on with testing the ROS mode.
This screen dump shows ROS traffic this evening on 7.050 MHz.
Comments
My name is Michael Powell 2E0VDS and I had my first contact on 20m with UY7LA.
I need a bit of help.
I tuned my radio into the correct frequency on 20m.
I see the two red lines on the screen. Now do I change my radio frequency to move away from UY7LA signal or what do I do?
I know that at the start of the transmission you get a short black line. Do I tune the transciever so that this line is in the middle of the two red lines?
Also I hear the tune of a signal but nothing appears on the screen but I can still decode ?
Sorry if these are basic questions but help is needed
Yours
Michael Powell
2E0VDS
For the moment I can only receive ROS and other digital modes.
73 es GL
Kjell, SM0FOB
Richi